Pull Chain Light Fixture Image

How to Connect Pull Chain Light Fixture

Trends Edison Bulb Light Fixtures

March 10, 2018 Light Fixtures

Ideas of Swag Light Fixture

Swag light fixture are used more frequently in areas where lighting is needed pendant and attic can not have access to enable wiring hanging ceiling light. Swag lamps are designed to hang from the chain attached to the ceiling and plug into the outlet. Any pendant light can be turned into a lamp loot with minor adjustments.

Simple Swag Light Fixture

Simple Swag Light Fixture

Disconnect the pendant chain. Use pliers to open the link holding the chain around the chain on top of the lamp. Remove the link to free chain. Slide the rope chain lamp. Unscrew the decision input into the swag light fixture. Grasp the inner cap in hand and turn to the left, pulling it from the socket to expose the socket wiring. Loosen the copper and silver in the socket, using a Phillips or Flathead screwdriver, and remove the cable from the lamp under them.

12 Inspiration Gallery from Ideas of Swag Light Fixture

Image of: Modern Swag Light Fixture Image
Image of: Modern Swag Light Fixture Picture
Image of: Modern Swag Light Fixture Ideas
Image of: Modern Swag Light Fixture
Image of: Swag Light Fixture Ideas
Image of: Best Swag Light Fixture Ideas
Image of: Nice Swag Light Fixture Ideas
Image of: Nice Swag Light Fixture
Image of: Nice Swag Light Fixture Style
Image of: Simple Swag Light Fixture Style
Image of: Simple Swag Light Fixture Design
Image of: Simple Swag Light Fixture
 

Install a new string to the swag light fixture, at least 6 feet long or more. Place chain link opening and closing the final link around the loop of the chain on top of the pendant. Wrap the length of the string in a soft cloth to avoid damaging the finish of the chain. Thread a new lamp cord through the chain and the light socket. Use a lamp cord per-cooked to desired length with the plug and switch online already installed.

READ  T5 Fluorescent Home Depot

Comments are closed.